Relativity Space, a 3D-printing specialist, launched the inaugural flight of its Terran 1 rocket late on Wednesday night, which successfully met some mission objectives before failing to reach orbit.
Report informs via CNBC that Terran 1 lifted off from LC-16, a launchpad at the US Space Force’s facility in Cape Canaveral, Florida, and flew for about three minutes. While the rocket cleared a key objective — passing the point of maximum atmospheric pressure during an orbital launch, known as Max Q — its engine sputtered and shut down early, shortly after the second stage separated from the first stage, which is the larger, lower portion of the rocket known as the booster.
Relativity launch director Clay Walker confirmed that there was an “anomaly” with the upper stage. The company said it will give “updates over the coming days” after analyzing flight data.
Despite falling short of reaching orbit, the “Good Luck, Have Fun” mission represents a significant step forward for the company, and helped demonstrate the viability of its ambitious manufacturing approach.
Terran 1 stands 110 feet high, with nine engines powering the lower first stage, and one engine powering the upper second stage. Its Aeon engines are 3D-printed, with the rocket using liquid oxygen and liquid natural gas as its two fuel types. About 85% of this first Terran 1 rocket was 3D-printed.
The production of the rocket took 60 days. It is the biggest object ever 3D-printed.